ONTEATag
Tagged Specification.
14 articles on Specification from the FONTEA Journal: specification notes and trade buying advice on European stainless steel bathroom fittings.
Categories
- Accessories (6)
- Specification (6)
- Materials (5)
- Commercial projects (3)
- Finishes (3)
- Maintenance (2)
- Procurement (2)
- Accessible bathrooms (1)
- Ordering and Delivery (1)
- Shower and Bath (1)
- Tap Systems (1)
- Technical Accessories (1)
- Wellness (1)
Tags
- Specification (14)
- Bathroom Accessories (13)
- Stainless Steel (12)
- Taps (7)
- AISI 316L (3)
- Coastal Projects (3)
- PVD (3)
- 316L Stainless Steel (2)
- AISI 304 (2)
- Brushed Stainless Steel (2)
- Chrome (2)
- Corrosion (2)
- Cycle Life (2)
- Finishes (2)
- Hospitality (2)
- Kitchen Mixers (2)
- Stainless Steel Taps (2)
- Accessible bathrooms (1)
- AISI 304L (1)
- Bathroom Planning (1)
- Black PVD (1)
- Brass (1)
- Build-to-rent (1)
- Bulk supply (1)
- Cartridges (1)
- Cleaning (1)
- Commercial (1)
- Customs and VAT (1)
- Delivery (1)
- Durability (1)
- Hard Water (1)
- Hospitality Projects (1)
- Importing (1)
- Incoterms (1)
- Limescale (1)
- Low Pressure (1)
- Ordering (1)
- Procurement (1)
- Programme (1)
- Safety (1)
- Scheduling (1)
- Shower Mixers (1)
- Spa and Wellness (1)
- Stop Valves (1)
- Submittals (1)
- Tap Finishes (1)
- Technical Accessories (1)
- Thermostatic (1)
- Toilet Roll Holders (1)
- Trade (1)
- Wall Fixings (1)
- Washroom Accessories (1)
- Water Efficiency (1)
- Water Inlets (1)
- Water Pressure (1)
- Welding (1)
- Wet Rooms (1)
-
Specification
Stainless Steel Bathroom Fittings for Coastal and Seafront Developments: A Salt-Air Corrosion Guide
What actually governs whether bathroom fittings survive a seafront elevation: the chloride gradient, finish, joint design, drainage and ventilation, how corrosion appears, and what to schedule.
-
Materials
Is Marine-Grade 316L Stainless Steel Worth It for a UK Bathroom?
Sometimes. 316L earns its premium where chlorides genuinely reach the fittings, and wastes money on a standard inland bathroom. Here is how to tell which situation you are in before you pay.
-
Tap Systems
Will European taps work on UK low-pressure and combi boiler systems?
European-style taps are often built to a higher pressure than a UK gravity-fed or combi system delivers. Here is what actually determines whether one will run properly, and how to check before you specify.
-
Finishes
Matching accessory finishes across a project: the extended accessory palette
How to hold one finish across every accessory in a scheme, which pieces must match exactly, which can vary, how to build a finish schedule, and what to do when a combination does not exist.
-
Specification
A tap and fitting spec-sheet checklist for architects writing a schedule
A practical checklist for specifying taps and fittings: the fields a schedule must state, what to ask a supplier to confirm, what gets left out and causes site problems, and how to spot a complete submittal.
-
Technical Accessories
Stop valves and water inlets explained: what these technical accessories do and why they matter
What a stop valve and a water inlet do, where each is fitted, why isolating one fixture matters, and what a specifier should ask a supplier before ordering concealed fittings.
-
Shower and Bath
Thermostatic vs manual shower mixers: what commercial and high-end residential specifiers choose
A thermostatic mixer holds the outlet temperature when flow or pressure changes; a manual mixer does not. Here is what each mechanism actually does, where UK rules require thermostatic control, and where a manual shower is the correct answer.
-
Accessible bathrooms
Accessories for Accessible Hotel Rooms and Doc M Washrooms: What to Specify Beyond Grab Rails
Plan accessible bathroom accessories by reach, transfer space, visibility and fixing coordination, then verify locations against the project access brief and approved drawings.
-
Commercial projects
Who Buys Bathroom Accessories on a Build-to-Rent or Hotel Project?
Assign accessory selection, procurement, backing, installation and handover responsibilities explicitly across FF&E and construction packages.
-
Maintenance
Housekeeping and Stainless Steel: Which Cleaning Chemicals Damage Bathroom Accessories?
Create a practical cleaning protocol for stainless bathroom accessories that controls product choice, dilution, contact time, rinsing and escalation.