ONTEACategory
Filed under Specification.
6 articles on Specification from the FONTEA Journal: specification notes and trade buying advice on European stainless steel bathroom fittings.
Categories
- Accessories (6)
- Specification (6)
- Materials (5)
- Commercial projects (3)
- Finishes (3)
- Maintenance (2)
- Procurement (2)
- Accessible bathrooms (1)
- Ordering and Delivery (1)
- Shower and Bath (1)
- Tap Systems (1)
- Technical Accessories (1)
- Wellness (1)
Tags
- Specification (14)
- Bathroom Accessories (13)
- Stainless Steel (12)
- Taps (7)
- AISI 316L (3)
- Coastal Projects (3)
- PVD (3)
- 316L Stainless Steel (2)
- AISI 304 (2)
- Brushed Stainless Steel (2)
- Chrome (2)
- Corrosion (2)
- Cycle Life (2)
- Finishes (2)
- Hospitality (2)
- Kitchen Mixers (2)
- Stainless Steel Taps (2)
- Accessible bathrooms (1)
- AISI 304L (1)
- Bathroom Planning (1)
- Black PVD (1)
- Brass (1)
- Build-to-rent (1)
- Bulk supply (1)
- Cartridges (1)
- Cleaning (1)
- Commercial (1)
- Customs and VAT (1)
- Delivery (1)
- Durability (1)
- Hard Water (1)
- Hospitality Projects (1)
- Importing (1)
- Incoterms (1)
- Limescale (1)
- Low Pressure (1)
- Ordering (1)
- Procurement (1)
- Programme (1)
- Safety (1)
- Scheduling (1)
- Shower Mixers (1)
- Spa and Wellness (1)
- Stop Valves (1)
- Submittals (1)
- Tap Finishes (1)
- Technical Accessories (1)
- Thermostatic (1)
- Toilet Roll Holders (1)
- Trade (1)
- Wall Fixings (1)
- Washroom Accessories (1)
- Water Efficiency (1)
- Water Inlets (1)
- Water Pressure (1)
- Welding (1)
- Wet Rooms (1)
-
Specification
Stainless Steel Bathroom Fittings for Coastal and Seafront Developments: A Salt-Air Corrosion Guide
What actually governs whether bathroom fittings survive a seafront elevation: the chloride gradient, finish, joint design, drainage and ventilation, how corrosion appears, and what to schedule.
-
Specification
Commercial vs residential taps: why cycle life and chemical resistance matter for hospitality fit-outs
Where the money genuinely belongs on a hospitality fit-out. How cycle life is measured, why exposed coatings see a harsher corrosion duty than concealed ones, and what a specifier should refuse to accept without a test standard.
-
Specification
Ceramic cartridge types and cycle life: what trade buyers should ask suppliers
Ceramic cartridge on a spec sheet says very little. Here is what the common cartridge types are, how cycle life is actually measured, and the questions that separate a tested figure from a marketing one.
-
Specification
A tap and fitting spec-sheet checklist for architects writing a schedule
A practical checklist for specifying taps and fittings: the fields a schedule must state, what to ask a supplier to confirm, what gets left out and causes site problems, and how to spot a complete submittal.
-
Specification
Specifying Taps for a Hotel Bathroom: Flow Rate, Thermostatic Safety and Finish Durability
What actually decides a hotel bathroom tap specification: flow rate for comfort and water duty, where thermostatic safety is required by regulation, and finishes that survive commercial cleaning.
-
Specification
Salt Spray Test Reports for Stainless Steel Bathroom Accessories
Read salt-spray reports by checking method, specimen, finish, exposure conditions and failure criteria, and avoid treating test hours as a service-life promise.